To calculate the overall star rating and percentage breakdown by star, we do not use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyses reviews to verify trustworthiness.
I was unsure at first, seemed like everyplace on amazon sold this exact same product. I was wrong.
It came to my doorstep STUPID fast. Like you think you know about fast, but really.. You don't. I unboxed this beautiful bastard faster then any child at Christmas. After looking at it for a minute, I quickly figured out how easy setup would be. Everyone here talking about getting the monitors on the bar with two people are clearly un-dedicated. Just face your monitors downwards, put the open part of the arms towards the bar, slide it in place like butter, and tighten. Not hard.
All I can say is buy this thing, and buy it before they run out. It's built like a rock. It's held my two monitors in place perfectly. Setup took maybe 4 minutes if you're not stupid and generally speaking I laugh like a little girl every time I see my desk now. Attached is a photo of my setup now.. All thanks to VIVO and their beautiful monitor stand.
One thing, tighten the bolts. People here say their monitors are sagging but it's because they're weak little unpatriotic cats. Just tighten up with your glorious muscles and you'll be fine.
Seriously, buy this, you'll have room for pigeons (or cats) to hangout under your monitors.. like me!
I have added the monitor stand to my stand up desk. At first, I used the 4” clamp and I liked that I was able to come up with a way to test this out. With the 4” clamp, the
Height-Adjustable Standing Desk - VARIDESK Pro Plus 36 - Black
could not go down all of the way, but I was ok with that. This weekend I drilled a hole in the top portion of the desk and attached the mount using the 4” grommet. Now the stand up desk is fully adjustable.
When I ordered the mount, I didn’t realize that the 4” grommet would work for passing it through a desk with a hole in it. I think that is helpful feature for those of you that have a desk where you cannot clamp and don’t want to drill a hole.
The monitor mount is more stable than setting a monitor on top of a stand. One of my old monitors did not have the VESA mount, so I left it on the stand. The old monitor would wobble and the new monitor would barely move.
I really like that it is fully adjustable! I have two 24” monitors on it. I have offset the monitor mount to fit my desk configuration. It has allowed me to have the left monitor arm fully extended and then the right one it adjusted to be next to it. The included wrenches allow me to adjust the tension of the arms.
I will try to add pictures with the new monitors on it. [Update - Added final photos]
*** Please rate my review as "Helpful" if it helped you because it helps me too! My opinions are solely mine and are NOT influenced by anything other than the QUALITY and PERFORMANCE of this particular product. Thanks! ***
Increíble relación calidad/precio, viene en una caja muy pequeña, pero no hay que alarmarse, la calidad de construcción es muy buena, viene bien ajustado para brindar estabilidad a los componentes. Está pintado en color negro mate, el tubo principal es delgado pero de material muy fuerte, los brazos también son delgados pero increíblemente firmes, la instalación es muy sencilla, no tarde más de 20 minutos en instalarlo. Incluye todos los tornillos necesarios y herramientas para su ajuste, solo se necesita un desarmador Phillips (punta de cruz) para un par de tornillos. En conclusión, estoy muy contento con mi compra, los monitores están más estables que con la base de fabrica o la base no empotrable que utilizaba antes.
I have to echo the other review here, I was very impressed and satisfied with this product when it arrived today. It attaches quite easily to 1cm thick bamboo table, minimal wobble when moving table, no wobble when typing. Cable management clips are a little cheap, but do an exceptional job of hiding cables for 4 HDMI & 2 power cables for the 2 separate systems plugged into my 2 monitors.
A couple of points, not negatives but just as a result of the design of this stand: 1. Monitors ideally should be the same brand, as there is no function to interdependently adjust the height, therefore if the VESA mounts are in a different location on each monitor they will not line up. 2. Ideally you would have this off-centre to ensure you can push the desk back to the wall, due to the slack of the arm requiring to be further back from the desk.
Otherwise very happy! Will update if anything goes wrong!
There's really nothing more to say about this thing. I had to use it in conjunction with a VESA adapter for my monitors which caused me some headaches, but this system worked flawlessly. You may need to adjust the tension of some of the joints, but hex keys are provided, so you'll be able to do so easily enough.
I needed a monitor arm mount for my 24 inch and ultrawide 29 inch monitor and they fit perfectly. I could say that an 29 inch monitor that is ultrawide is the limit of the mount if you use a regular 24 inch monitor on the side because they touch each other even when the arms are almost a the maximum length.
This mount provide more space on the desk because the monitor stand are not needed anymore. Also, it can be easier to adjust the monitor on the same height since they have better adjustment using the arm than the regular stands on some monitors.
Pros: Solid made of metal. Easy to follow instructions on the assembly. Fit multiple screen and tables. Easely adjustable. Can fix a microphone arm to it withough problems.
Cons: Have a lot of pieces so can be messy if you are not paying attention on your assembly methods. Still need a tool to adjust the arms.
Overall, this is perfect to have a clean and usefull workspace. See the picture for my result after having the arm.
I am really impressed with this stand. It was very easy to setup and came with everything I needed includeing the screws for the monitors. It even cam with a kit for curved monitors but since mine are flat I did use it. It also ha clips for cable managment. it was rather stiff at first but once you have hte monitors on it is much easier to manpulate. The monitors can turn and twist in any direction you want. I am using the clamp but it did come with a kit to mount it into the desk itself if you have a drill.
I definitly recomend this stand as long as you don't have a glass topped desk.
This is a really great sturdy stand. It worked perfectly for my 27” inch LG screens. They thought of some great details with the stand, including the Allen key holder to keep the keys handy right on the pole. It also came with several clips for cable control. As you can see from the photos mine is mounted to my glass desktop, there were no issues in attaching it to the desktop the clamp has a full range of motion. It also has a grommet option which is well-built and secure although I didn’t use it in this particular case. I really like that the arms don’t need to extend well out into the room in order to have the two screens close together. I found many of the other arms were hundreds of dollars more, and took up a lot of real estate out the back of my desk. The stand would work particularly well if you have a little space between your desk and a wall, which is where other stands often fail. You really can’t beat this stand, when you add the fact that it is a quarter of the price of most quality stands, this really is a great buy.